| 4 WHEEL DISC BRAKE INSTALLATION GUIDE |
| NON LIFTED AND LIFTED EZGO GOLF CARTS |
| FIG 1 |
| FIG 2 |
| FIG 4 |
| FIG 3 |
| Typical front brake line set up. Note banjo fitting is in the up position and there is a loop in the brake line to allow the wheels to turn without binding or pulling the brake lines |
| 4 wheel master cylinder installed on frame top view 2 wheel cylinder mounts the same way. Spring is to be removed, spring not needed on 4 wheel or 2 wheel rear brake installations |
| Actuator arm |
| Master cylinder frame mount |
| Typical mounting of master cylinder on a Ezgo frame. Bracket bolts to bottom of frame rail using 3 self drilling screws |
